add to cart success
This product has variants and can only be added to the cart by viewing the product details page.
add to cart success
Submit Request Quote
 * Denotes Required Field.
Name:
 *
Company Name:
Phone:
Email:
 *
Message:
Request Quote
 

General Cable Carol Brand Double Jacket Drill Cord

General Cable Carol Brand Industrial Cord

General Cable Carol Brand Double Jacket Drill Cord
MSHA Approved Remote Control & Drill Cord
90°C, 600 Volt

Carol Brand Drill Cord Construction:

  • Conductor: 14 through 10 AWG fully annealed stranded Bare Copper per ASTM B3/B174
  • Insulation: Premium-grade, color-coded Ethylene Propylene Diene Monomer Rubber (EPDM)
  • Conductor Color Coding: Carol Double Jacket Drill Cord Color Code Chart
  • Jacket: Black Chlorinated Polyethylene (CPE) or Neoprene
  • Cable Reinforcement: An open polyester braid reinforcement is applied between layers for mechanical strength
  • Jacket Marking:
    • CPE Jacket: CAROL (SIZE & NO. OF CONDS.) DOUBLE JACKET REMOTE CONTROL AND DRILL CORD 600 V 90°C P-07-KA110003-MSHA MADE IN USA
    • Neoprene jacket: CAROL (SIZE & NO. OF CONDS.) NEOPRENE DOUBLE JACKET REMOTE CONTROL AND DRILL CORD 600 V 90°C P-07-KA110006-MSHA MADE IN USA

Carol Brand Drill Cord Ratings & Approvals:

  • Temperature Range: -40°C to +90°C
  • Voltage Rating: 600 volts
  • RoHS Compliant
  • ICEA S-75-381
  • Passes MSHA Flame Test
  • Additional rating available upon request
  • Other sizes and numbers of conductors available upon request

Carol Brand Drill Cord Applications:

  • Industrial and light- to medium-duty mining applications
  • Heavy-duty service as power supply cable
  • AC systems (grounded and ungrounded)
  • Heavy-duty and long service life applications
  • Mobile and portable electrical equipment
  • Motor and battery leads
  • Wet or dry locations in underground mines in accordance with Schedule 26 of the U.S. Bureau of Mines
  • 3-conductor cables - use on AC systems where no grounding is required or on DC systems with one conductor for grounding
  • 4-conductor cables - use on two- or three-phase AC systems with one conductor used for grounding
  • 5-conductor cables - use in applications where separating the system neutral from the frame ground is required

Carol Brand Drill Cord Features:

  • Withstands severe environmental conditions
  • Indent-printed for easy identification
  • Withstands exposure to oil, acids, alkalies, heat, moisture and most chemicals
  • Flexible stranding
  • Excellent impact, crush and tear resistance
  • Sunlight-resistant
  • Reinforced jacket for increased durability
  • TRU-Mark® sequential footage marking
Part Number AWG SizeNo. of Cond.Conductor StrandingNom. Dia. of Cond.Nom. Insul. Thick. (in)Nom. O.D. (in)AmpsApprox LBS/MFT
02861 14 2 41/30 0.072 0.045 0.6400 18 210
02862 14 3 41/30 0.072 0.045 0.6700 18 240
02868 14 4 41/30 0.072 0.045 0.7150 15 285
02835 14 5 41/30 0.072 0.045 0.7850 12 345
02845 12 5 65/30 0.096 0.045 0.8400 16 405
02806 12 6 65/30 0.096 0.045 0.8900 16 470
02855 10 5 104/30 0.117 0.045 0.8950 20 495
02961 14 2 41/30 0.072 0.045 0.6400 18 220
02962 14 3 41/30 0.072 0.045 0.6700 18 260
02968 14 4 41/30 0.072 0.045 0.7150 15 300
02935 14 5 41/30 0.072 0.045 0.7850 12 365
02945 12 5 65/30 0.096 0.045 0.8400 16 425
02906 12 6 65/30 0.096 0.045 0.8900 16 490
02955 10 5 104/30 0.117 0.045 0.8950 20 515