add to cart success
This product has variants and can only be added to the cart by viewing the product details page.
add to cart success
Submit Request Quote
 * Denotes Required Field.
Name:
 *
Company Name:
Phone:
Email:
 *
Message:
Request Quote
 

EPR/CPE Power Cable with Copper Tape Shield (15kV)

EPR/CPE Power Cable with Copper Tape Shield (15kV)
UL Type MV-105, 133% Ins. Level, 220 Mils, 15kV

Product Approvals:

  • Industry Approvals:
    • National Electric Code (NEC)
    • UL 1072
    • ICEA S-93-639/NEMA WC74
    • ICEA S-97-682
    • AEIC CS8
    • UL Listed as Type MV-105 for use in accordance with NEC
    • Sizes 1/0 AWG and larger are listed and marked "Sunlight-Resistant FOR CT USE" i naccordance with NEC
    • IEEE 1202 (70,000 BTU/hr)/CSA FT4
    • OSHA acceptable
  • Optional Flame Tests:
    • ICEA T-29-520 (210,000 BTU/hr)

EPR/CPE Power Cable with Copper Tape Shield (15kV) Construction:

  • Conductor:
    • 2 AWG thru 1000 kcmil annealed bare copper compact Class B strand
  • Extended Strand Shield (ESS):
    • Extruded Thermoset Semi-Conducting Stress Control Layer over conductor
  • Insulation:
    • Ethylene Propylene Rubber (EPR) insulation, colored to contrast with the black conducting shield layers
  • Extruded Insulation Shield (EIS):
      Thermoset Semi-Conducting Polymeric Layer free stripping from insulation
  • Metallic Shield:
    • 5 mil annealed copper tape with an overlap of 25%
  • Jacket:
    • Flame retardant, moisture and sunlight resistant Chlorinated Polyethylene (CPE)

EPR/CPE Power Cable with Copper Tape Shield (15kV) Options:

  • PVC jacket
  • Low-Smoke, Halogen-Free (LSZH) jacket
  • STRANDFILL® - blocked conductor. Tested in accordance with ICEA T-31-0-610
  • 100% insulation level

EPR/CPE Power Cable with Copper Tape Shield (15kV) Applications:

  • Superior performance in petrochemical plants, pulp and paper mills, steel mills, textile mills, water and sewage treatment facilities, environmental protection systems, railroads, mines, utility power generating stations and other industrial three-phase applications
  • Suitable for use in wet or dry locations, when installed in accordance with NEC
  • For use in aerial, direct burial, conduit, open tray and underground duct installations
  • For use in direct burial if installed in a system with a ground conductor that is in close proximity, and conforms with NEC 250.4 (A) (5)

EPR/CPE Power Cable with Copper Tape Shield (15kV) Features:

  • Rated at 105°C
  • Excellent heat and moisture resistance
  • Excellent flame resistance
  • Outstanding corona resistance
  • Flexibility for easy handling
  • High dielectric strength
  • Low moisture absorption
  • Electrical stability under stress
  • Low dielectric loss
  • Chemical resistant
  • Meets cold bend test at -35°C

 

Part Number AWG SizeJacket ThickNom. O.D. (in)Nom. Dia. of Cond.Min. Insul. Dia. (in)Max. Insul. Dia. (in)Approx LBS/MFTAmpacity (Duct in Air)Ampacity (Underground)Ampacity (Tray)
85655.065100-18 2 0.080 0.99 0.27 0.710 0.800 655 165 165
85655.065050-18 1 0.080 1.02 0.31 0.745 0.830 730 190 185
85655.067550-18 1/0 0.080 1.06 0.34 0.780 0.865 820 215 215 220
85655.067600-18 2/0 0.080 1.10 0.38 0.820 0.905 933 255 245 250
85655.067650-18 3/0 0.080 1.14 0.43 0.865 0.950 1072 290 275 290
85655.067700-18 4/0 0.080 1.21 0.48 0.920 1.005 1248 330 315 335
85655.068000-18 250 0.080 1.25 0.53 0.970 1.060 1402 365 345 370
85655.068100-18 350 0.080 1.35 0.62 1.070 1.155 1778 440 415 460
85655.068250-18 500 0.080 1.47 0.74 1.190 1.275 2325 535 500 575
85655.068500-18 750 0.080 1.65 0.91 1.370 1.460 3250 655 610 745
85655.068750-18 1000 0.110 1.86 1.06 1.520 1.610 4209 755 690 890