add to cart success
This product has variants and can only be added to the cart by viewing the product details page.
add to cart success
Submit Request Quote
 * Denotes Required Field.
Name:
 *
Company Name:
Phone:
Email:
 *
Message:
Request Quote
 

EPR/HYP Unshielded Power Cable (2400 V)

    EPR/HYP Unshielded Power Cable (2400 V)
    UL Type MV-90, 600 V

    We're sorry, but this cable is no longer available. Please call us at 800-472-4655 or email us and we will help you find a suitable alternative.

    Product Approvals:

    • National Electric Code (NEC)
    • ICEA S-96-659/NEMA WC71
    • UL 1072
    • FAA L824 specification for cable for Underground Airport Lighting Circuits
    • UL Listed as Type MV-90 for use in accordance with NEC
    • Sizes 1/0 AWG and larger are listed and marked "Sunlight-Resistant FOR CT USE" in accordance with NEC and also meet IEEE 383 (70,000 BTU/hr)
    • Listed "oil-resistant II"
    • Meets EPA 40 CFR part 261 leachable lead content per TCLP method
    • OSHA acceptable

    EPR/HYP Unshielded Power Cable (2400 V) Construction:

    • Conductor:
      • 9 AWG thru 1000 kcmil annealed bare copper Class B strand
    • Extended Strand Shield (ESS):
      • Extruded Thermoset Semi-Conducting Stress Control Layer over conductor
    • Insulation:
      • Ethylene Propylene Rubber (EPR) colored to contrast with black jacket material
    • Jacket:
      • Low-Lead Chlorosulfonated Polyethylene (CSPE)/Elastomer blend

    EPR/HYP Unshielded Power Cable (2400 V) Options:

    • Multi conductor constructions
    • Other constructions available upon request

    EPR/HYP Unshielded Power Cable (2400 V) Applications:

    • For use in industrial and utility applications, where ease of installation is a major concern because of limited space and exposure to personnel is minimal
    • For use in wet or dry locations, when installed in accordance with NEC
    • For use in aerial, conduit, open tray and underground duct installations

    EPR/HYP Unshielded Power Cable (2400 V) Features:

    • Rated at 90°C
    • Excellent heat and moisture resistance
    • Flexibility for easy handling
    • High dielectric strength
    • Low moisture absorption
    • Electrical stability under stress
    • Low dielectric loss
    • Chemical and radiation resistant
    • Simplifies splicing and termination because there is no need to handle the cable shield
    • Extra-tough, mechanically rugged composite insulation and jacket construction
    • Meets cold bend test at -35°C

     

    Part Number Nom. O.D. (in)Approx LBS/MFTAWG SizeNom. Insul. Thick. (in)Nom. Dia. of Cond.Min. Insul. Dia. (in)
    74505.205400-18 0.58 196 8 0.125 0.14 0.41
    74505.205300-18 0.62 241 6 0.125 0.17 0.44
    74505.205200-18 0.66 308 4 0.125 0.22 0.49
    74505.205100-18 0.72 408 2 0.125 0.27 0.55
    74505.205050-18 0.76 476 1 0.125 0.31 0.58
    74505.207550-18 0.79 562 1/0 0.125 0.34 0.62
    74505.207600-18 0.84 666 2/0 0.125 0.38 0.66
    74505.207650-18 0.92 823 3/0 0.125 0.43 0.71
    74505.207700-18 0.97 983 4/0 0.125 0.48 0.76
    74505.208000-18 1.08 1183 250 0.140 0.53 0.84
    74505.208100-18 1.17 1545 350 0.140 0.62 0.93
    74505.208250-18 1.30 2077 500 0.140 0.74 1.06
    74505.208500-18 1.24 3040 750 0.155 0.91 1.26
    74505.208750-18 1.70 3913 1000 0.155 1.06 1.42