add to cart success
This product has variants and can only be added to the cart by viewing the product details page.
add to cart success
Submit Request Quote
 * Denotes Required Field.
Name:
 *
Company Name:
Phone:
Email:
 *
Message:
Request Quote
 

HVTECK Single Conductor Armored Power Cable with Wire Shield (5kV, 115 Mils)

HVTECK Shielded Armored Power Cable 5kV


TRXLPE/Wire Shield/PVC/AIA/PVC Single Conductor Shielded Armored Power Cable
5 kV, CSA HVTECK, 115 Mils

Product Approvals:

  • CSA FT1 and FT4
  • IEEE 383 (70,000 BTU/hr)
  • IEEE 1202 (70,000 BTU/hr)CSA FT4
  • ICEA T-30-520 (70,000 BTU/hr)
  • ICEA T-29-520 (70,000 BTU/hr)
  • Hazardous Location Rating: HL
  • CSA Standard C68.3
  • CSA Standard C22.2 No. 174
  • CSA Approval (file) numbers: LR27161
  • Meets EPA 40 CFR, part 261 for leachable lead content per TCLP method
  • OSHA acceptable

HVTECK Single Conductor Armored Power Cable with Wire Shield (5kV, 115 Mils) Construction:

  • Conductor: 6 AWG thru 1000 kcmil bare copper compact Class B strand
  • Ground (Bonding) Conductor: The conductor is a concentric serving of solid copper wires applied over the thermosetting insulation shield
  • Insulation: Tree-Retardant Cross-Linked Polyethylene (TR-XLPE)
  • Insulation Shield: A Semi-Conducting Thermosetting Layer, applied in a triple extrusive process, plus a concentric serving of solid copper wires acting as both a drain wire shield and as a grounding (bonding) conductor, Black
  • Inner Jacket: Flame retardant, moisture and sunlight resistant Polyvinyl Chloride (PVC)-Black
  • Armor: Aluminum Interlocked Armor (AIA)
  • Overall Jacket: ACID-FLAME CHECK flame retardant, moisture and sunlight resistant Polyvinyl Chloride (PVC)-Orange
  • Strand Shield: A Thermoset Semi-Conducting Strand Shield is extruded over the conductor

HVTECK Single Conductor Armored Power Cable with Wire Shield (5kV, 115 Mils) Applications:

  • For wiring in all hazardous locations when used with certified HL cable glands
  • For exposed and concealed wiring in dry, damp or wet locations
  • For use in ventilated, non-ventilated and ladder-type cable trays in dry, damp or wet locations
  • For direct earth burial (with protection as required by inspections authority)

HVTECK Single Conductor Armored Power Cable with Wire Shield (5kV, 115 Mils) Features:

  • Rated at 90°C wet or dry
  • Excellent crush, oil and chemical resistance
  • Provides long service life
  • Cost-effective alternative to installations in conduit
  • Meets cold bend and impact tests at -40°C

HVTECK Single Conductor Armored Power Cable with Wire Shield (5kV, 115 Mils) Options:

  • Other constructions available upon request
Part Number AWG SizeNom. O.D. (in)Approx LBS/MFTArmor (in)Ampacity @ 30°CGround AWG Size
8748.3553-18 6 1.0400 550 0.95 112 8
8748.3552-18 4 1.0800 680 0.99 148 6
8748.3551-18 2 1.1700 840 1.08 195 6
8748.35505-18 1 1.2500 960 1.16 225 4
8748.35755-18 1/0 1.2800 1060 1.19 260 4
8748.3576-18 2/0 1.3200 1170 1.23 299 4
8748.35765-18 3/0 1.4000 1350 1.31 345 3
8748.3577-18 4/0 1.4500 1520 1.36 400 3
8748.358-18 250 1.5300 1730 1.44 444 2
8748.3581-18 350 1.6700 2170 1.57 549 1
8748.35825-18 500 1.7900 2860 1.69 688 1/0
8748.3585-18 750 1.9900 3940 1.89 889 2/0
8748.35875-18 1000 2.2000 5090 2.10 1061 2/0