52 items

General Cable MOR® Polyrad® Paired Signal Cable (Individually/Overall Shielded) Specifications

General Polyrad Signal Cable Construction:

  • Conductor: 20 AWG through 14 AWG soft annealed flexible stranded Tinned Copper
  • Insulation: Polyrad® XT-125 Irradiated Cross-Linked Polyolefin (XLPO)
  • Color Code: Black and white with printed numbers
  • Individually Shielded Pairs: Aluminum/polymer tape and Tinned Copper drain wire
  • Cable Core: Core binder tape when required
  • Overall Shield: Overall Aluminum/polymer tape with Tinned Copper Drain Wire
  • Sheath: Black Irradiated Cross-Linked Chlorosulfonated Polyethylene (PE)
  • Armor: Bronze braid 88% minimum coverage
  • Sheath: Mud oil-resistant, black Irradiated Cross-Linked Chlorosulfonated Polyethylene (PE)
  • Print (including but not limited to): MOR® POLYRAD® XT-125 (UL) E85994 BR782B 110C XX/PR XXAWG -- (CSA) LL 9755 SPEC 245/1309 FT4 -40C SR 600/1000 V -- IEC 60332.3A IEEE 1580 TYPE P (ETL) 109229 YEAR OF MFG SEQUENTIAL FOOTAGE MARK

General Polyrad Signal Cable Ratings Approvals:

  • Voltage Rating: 600V/1000V
  • Max. Temperature: 125°C
  • Industry Compliances:
    • API-RP14F
    • CSA C22.2 No. 245 Type X110
    • IEEE 1580 Type P
    • IEC 60092-3
    • NEK 606 for mud oil resistance
    • UL 1309 Type X110
    • UL Listed 110°C Marine Shipboard Cable
  • Flame Test:
    • IEEE 383
    • IEEE 1202
    • IEC 60332-3-22 Cat. A (supersedes IEC 60332-3A)
    • CSA C22.2 No. 0.3 FT4
  • Meets cold bend test at -55°C
  • Meets cold impact test at -40°C
  • Suitable for use in Class 1, Division 1 and Zone 1 Hazardous Locations when installed in accordance with API RP14F

General Polyrad Signal Cable Applications:

  • Offshore oil and gas drilling platforms, MODUs, ships, and FPSOs
  • Land-based oil and gas drilling rigs

General Polyrad Cable Features:

  • Meets NEK 606 mud oil resistance requirements including ester-based muds
  • Meets UL 2225 crush and impact requirements of Type MC-HL cables
  • Flexible stranding to facilitate ease of cable installation and termination
  • Temperature rated at 125°C for long life, higher ampacities and protection from thermal overloads