add to cart success
This product has variants and can only be added to the cart by viewing the product details page.
add to cart success
Submit Request Quote
 * Denotes Required Field.
Name:
 *
Company Name:
Phone:
Email:
 *
Message:
Request Quote
 

EPR/CPE Power Cable with Copper Wire Shield (15kV)

Part Number AWG SizeNom. O.D. (in)Nom. Dia. of Cond.Min. Insul. Dia. (in)Max. Insul. Dia. (in)Approx LBS/MFTAmpacity (Duct in Air)Ampacity (Underground)Ampacity (Tray)
95805.330100-18 2 0.9300 0.27 0.710 0.800 555 165 165
95805.337550-18 1/0 1.0100 0.34 0.750 0.865 734 215 215 220
95805.337600-18 2/0 1.0500 0.38 0.820 0.905 844 255 245 250
95805.332650-18 3/0 1.1000 0.43 0.865 0.955 978 290 275 290
95805.337700-18 4/0 1.1600 0.48 0.920 1.005 1151 330 315 335
95805.343000-18 250 1.2300 0.53 0.970 1.060 1325 365 345 370
95805.343100-18 350 1.3300 0.62 1.070 1.155 1691 440 415 460
95805.343250-18 500 1.4600 0.74 1.190 1.275 2238 535 500 575
95805.348500-18 750 1.6700 0.91 1.370 1.460 3174 655 610 745
95805.153750-18 1000 1.8600 1.06 1.520 1.610 4122 755 690 890

EPR/CPE Power Cable with Copper Wire Shield (15kV)
UL Type MV-105, 133% Level, 220 Mils, 15kV

Product Approvals:

  • Industry Approvals:
    • National Electric Code (NEC)
    • UL 1072
    • ICEA S-93-639/NEMA WC74
    • ICEA S-97-682
    • AEIC CS8
    • UL Listed as Type MV-105 for use in accordance with NEC
    • Sizes 1/0 AWG and larger are listed and marked "Sunlight-Resistant FOR CT USE" in accordance with NEC
    • IEEE 1202 (70,000 BTU/hr)/CSA FT4
    • Meets EPA 40 CFR, Part 2671 for leachable lead content per TLCP method
    • OSHA acceptable
  • Optional Flame Tests:
    • ICEA T-29-520 (210,000 BTU/hr)

EPR/CPE Power Cable with Copper Wire Shield (15kV) Construction:

  • Conductor:
    • 2 AWG thru 1000 kcmil annealed bare copper compact Class B strand
  • Extended Strand Shield (ESS):
    • Extruded Thermoset Semi-Conducting Stress Control Layer over conductor
  • Composite Insulation Shield and Jacket:
    • Six corrugated copper drain wires embedded in composite layers of Semi-Conducting Thermoset Copolymer and Semi-Conducting Black Flame Retardant Chlorinated Polyethylene (CPE)

EPR/CPE Power Cable with Copper Wire Shield (15kV) Applications:

  • Installed in a broad range of commercial, industrial and utility projects such as pulp and paper mills, petrochemical plants, steel mills, textile mills, water and sewage treament facilities, environmental protection systems, railroads, mines and fossil fuel utility generating stations
  • Suitable for use in wet or dry locations, when installed in accordance with NEC
  • For use in aerial, direct burial, conduit, open tray and underground duct installations
  • For use in direct burial if installed in a system with a ground conductor that is in close proximity, and conforms with NEC 250.4 (A) (5)

EPR/CPE Power Cable with Copper Wire Shield (15kV) Features:

  • Rated at 105°C
  • Reduced conductor size and shield system provides the smallest premium medium-voltage shielded power cable with full insulation
  • Smaller outside dimensions reduce the size of duct needed or increase the ampacity per duct
  • All features contribute to faster and easier installation
  • Superior cold bend and cold impact performance
  • Stable and constant shield short circuit performance
  • Excellent heat and moisture resistance
  • Outstanding corona resistance
  • Flexibility for easy handling
  • High dielectric strength
  • Low dielectric loss
  • Low moisture absorption
  • Electrical stability under stress
  • Chemical resistant
  • Sunlight resistant
  • Meets cold bend test at -55°C