add to cart success
This product has variants and can only be added to the cart by viewing the product details page.
add to cart success
Submit Request Quote
 * Denotes Required Field.
Name:
 *
Company Name:
Phone:
Email:
 *
Message:
Request Quote
 

EPR/CPE Power Cable with Copper Wire Shield (25kV and 35kV)

Part Number AWG SizeNom. O.D. (in)Nom. Dia. of Cond.Min. Insul. Dia. (in)Max. Insul. Dia. (in)Approx LBS/MFTAmpacity (Duct in Air)Ampacity (Underground)Ampacity (Direct Burial)
96305.342550-18 1/0 1.2900 0.34 1.020 1.120 1014 215 215 295
96305.342600-18 2/0 1.3600 0.38 1.060 1.160 1163 255 245 335
96305.342650-18 3/0 1.4100 0.43 1.105 1.205 0.00 290 275 380
96305.342700-18 4/0 1.4300 0.48 1.160 1.260 1442 330 315 435
96305.343000-18 250 1.5100 0.53 1.210 1.315 1645 365 345 475
96305.343100-18 350 1.6000 0.62 1.310 1.410 2024 440 415 575
96305.343250-18 500 1.7400 0.74 1.430 1.530 2608 535 500 700
96305.343500-18 750 1.9500 0.91 1.610 1.710 3596 655 610 865
96305.343750-18 1000 2.1100 1.06 1.760 1.865 4513 755 690 1005

EPR/CPE Power Cable with Copper Wire Shield (25kV and 35kV)
UL Type MV-105, 133% Ins. Level, 220 Mils, Three Conductor, 15kV

Product Approvals:

  • Industry Approvals:
    • National Electric Code (NEC)
    • UL 1072
    • ICEA S-93-639/NEMA WC74
    • ICEA S-97-682
    • AEIC CS8
    • UL Listed as Type MV-105 for use in accordance with NEC
    • Sizes 1/0 AWG and larger are listed and marked "Sunlight-Resistant FOR CT USE" in accordance with NEC
    • IEEE 1202 (70,000 BTU/hr)/CSA FT4
    • Meeets EPA 40 CFR, Part 2671 for leachable lead content per TCLP method
    • OSHA acceptable
  • Optional Flame Tests:
    • IEEE 1202 (70,000 BTU/hr)/CSA FT4
    • ICEA T-29-520 (210,000 BTU/hr)

EPR/CPE Power Cable with Copper Wire Shield (25kV and 35kV) Construction:

  • Conductor:
    • 1/0 AWG thru 1000 kcmil annealed bare copper compact Class B strand
  • Extended Strand Shield (ESS):
    • Extruded Thermoset Semi-Conducting Stress Control Layer over conductor
  • Insulation:
    • Ethylene Propylene Rubber (EPR) insulation, colored to contrast with the black conducting shield layers
  • Composite Insulation Shield and Jacket:
    • Six corrugated copper drain wires embedded in composite layers of Semi-Conducting Thermoset Copolymer and Semi-Conducting Black Flame Retardant Chlorinated Polyethylene (CPE)

EPR/CPE Power Cable with Copper Wire Shield (25kV and 35kV) Options:

  • 25kV 100% Insulation Level
  • 35kV 133% Insulation Level

EPR/CPE Power Cable with Copper Wire Shield (25kV and 35kV) Applications:

  • Installed in a broad range of commercial, industrial and utility projects such as pulp and paper mills, petrochemical plants, steel mills, textile mills, water and sewage treatment facilities, environmental protection systems, railroads, mines and fossil fuel generating stations
  • Suitable for use in wet or dry locations, when installed in accordance with NEC
  • For use in aerial, direct burial, conduit, open tray and underground duct installations
  • For use in direct burial if installed in a system with a ground conductor that is in close proximity, and conforms with NEC 250.4 (A) (5)

EPR/CPE Power Cable with Copper Wire Shield (25kV and 35kV) Features:

  • Rated at 105°C
  • Reduced conductor size and shield system provide the smallest premium medium-voltage shielded power cable with full insulation
  • Smaller outside dimensions reduce the size of duct needed or increase the ampacity per duct
  • All features contribute to faster and easier installation
  • Superior cold bend and cold impact performance
  • Stable and constant shield short
  • Excellent heat and moisture resistance
  • Outstanding corona resistance
  • Flexibility for easy handling
  • High dielectric strength
  • Low moisture absorption
  • Electrical stability under stress
  • Low dielectric loss
  • Chemical resistant
  • Meets cold bend test at -55°C