PE/PVC/PVC Unshielded Multi-Conductor Control Cable Construction:

Conductor: 18 AWG through 10 AWG bare, annealed copper per ASTM B3
- Class B stranding per ASTM B8
Insulation: Clear Polyethylene (PE)
Conductor Jacket: Color-coded Polyvinyl Chloride (PVC)
- Color-coded per ICEA Method 1; Table E-1 (includes white and green)
Cable Core: Conductors are cabled with non-hygroscopic fillers as necessary, and an overall binder tape
Overall Jacket: Flame retardant, moisture and sunlight resistant Polyvinyl Chloride (PVC)
PVC Control Cable Options:
- Tinned copper conductor
- Class C stranding per ASTM B8
- Insulated or uninsulated ground conductors
- Copper tape shield or aluminum/polymer tape shield with tinned copper drain wire over the cable core
- Bare or tinned copper braided basket weave shield
- Duralox® aluminum or galvanized steel interlocked armor
- Intergrabon® Moisture Barrier system
- Corrugated copper tape shield longitudinally applied

PE/PVC/PVC Unshielded Multi-Conductor Control Cable Ratings and Approvals:

PE/PVC/PVC Unshielded Multi-Conductor Control Cable Applications:

For applications where environmental factors require cable characteristics including flame-retardance, resistance to chemicals, abrasion, and resistance to the harmful effects of sunlight and weather.
It may be installed in ducts, cable trays, conduits, Class I, Division 2 industrial hazardous locations, or continuous rigid cable supports.

273615-18

Part Number