Part Number: FIT-300-3/10
FIT-300-3/10 FIT-300 Heat Shrink Tubing
Our FIT-300-3/10 heat shrink tubing is part of our Alpha Wire, Cable & Tubing line. It has an expanded inner diameter of 3/10 and a 2.5:1 shrink ratio at 140°C min. Alpha FIT-230 is made of a Dual Wall, Adhesive Lined Semi-Rigid Irradiated Polyolefin (XLPO) material with an operational temperature of -55°C to 125°C, a max tensile strength of 1500 psi and a dielectric strength of 500 V/mil. This heat shrink tubing features a meltable inner wall for encapsulation without adhesives. FIT-300 heat shrinkable tubing has higher shrink ratios and a thicker wall for added protection.
| Alpha FIT-300-3/10 Specifications: (subject to change without notice) |
| Size (in) |
3/10 |
| Min. Temp |
-55°C |
| Max. Temp |
125°C |
| Recovered I.D. (in) |
0.05 |
| Nom. Rec. Wall Thick. (in) |
0.11 |
| Expanded I.D. (in) |
0.3 |
| UL Style |
UL 224 Except Clear |
| Mil-Spec |
AMS DTL-23053/4 Class 1 |
| Additional Ratings |
REACH Regulation, RoHS |
| Shrink Temp |
140°C min |
| Max. Long. Shrinkage |
1%/-10% |
| Dielectric Strength |
500 V/mil |
| Volume Resistivity |
1016ohm-cm |
| Specific Gravity |
0.99 |
| Ultimate Elongation |
2 |
| Max. Tensile Strength |
1500 psi |
| Shrink Ratio |
2.5:1 |
| Material |
Dual Wall, Adhesive Lined Semi-Rigid Irradiated Polyolefin (XLPO) |