ApplicationIndoor/Outdoor
Approx LBS/MFT34.00
Cond. MaterialBare Copper
Conductor StrandingStranded
Dielectric (in)0.150
Dielectric MaterialFoam Polyethylene (FPE)
Jacket MaterialThermoplastic Elastomer (TPE)
Max. Temp85C
LMR-240-UF
LMR 240-UF Cable
The LMR 240-UF cable is an extremely flexible, low-loss cable designed for outdoor use. It features a bare copper inner conductor and an aluminum tape outer conductor, which enables the tightest bend radius of any cable of similar size and performance. It also has a foam PE dielectric, a tinned copper braid, and a black TPE jacket. This cable has a maximum temperature of 85°C and a voltage rating of 1500V. The LMR 240-UF cable is suitable for use in applications that require periodic or repeated flexing.
1 item
LMR 240-UF Coax Cable Specifications
LMR 240-UF Construction:
- Inner Conductor: Stranded Bare Copper
- Dielectric: Foam Polyethylene (FPE)
- Outer Conductor: Aluminum Tape
- Overall Braid: Tinned Copper
- Jacket: Black Thermoplastic Elastomer (TPE)
LMR-240-UF Ratings:
- Temperature:
- Installation: -40°C to 85°C
- Storage: -70°C to 85°C
- Operating: -40°C to 85°C
- Voltage Rating: 1500 volts
- RF Shielding: 50 dB greater than typical single shielded coax (40 dB) - multi-ply bonded foil outer conductor rated conservatively at 90 dB
LMR 240-UF Applications:
- LMR 240-UF is suitable for jumper assemblies in wireless communications systems.
- Ideal for short antenna feeder runs (e.g. WLL, GPS, LMR, Mobile Antennas)
- LMR 240-UF UltraFlex coax may be used in many applications that require periodic/repeated flexing.