The TCOM-195 Cable is a flexible, low-loss coaxial cable that features a solid bare copper inner conductor and an SPC strip braid outer conductor. This flexible outer conductor enables the tightest bend radius of any cable of similar size and performance. This cable also has a foam PE dielectric and tinned copper braid over an aluminum tape. This cable is a low-smoke zero-halogen cable. It is also flame retardant, UV resistant, and has a maximum temperature of 85°C. The TCOM-195 cable uses standard LMR 195 connectors. View TCOM-195 coax connectors here. TCOM-195 connectors are manufactured by Times Microwave for TCOM-195 low loss passive intermod coax, and are offered in interface types: N Male, TNC Male, SMA Male. Most LMR connectors come with a crimp outer attachment using standard hex crimp sizes.

3 items

  • TC-195-NMH-X
    $0.00 /
    • Approx LBS/MFT: 73.00
    • Connector Type: Straight Plug
    • Contact Attach (Inner): Solder
    Order
    Add to List
  • TC-195-SM-SS-X
    $0.00 /
    • Approx LBS/MFT: 15.00
    • Connector Type: Straight Plug
    • Contact Attach (Inner): Solder
    Order
    Add to List
  • TC-195-TM-X
    $0.00 /
    • Approx LBS/MFT: 45.00
    • Connector Type: Straight Plug
    • Contact Attach (Inner): Solder
    Order
    Add to List

TCOM-195 Coax Cable Specifications

TCOM-195 Cable Construction:

  • Inner Conductor: Solid Bare Copper
  • Dielectric: Foam Polyethylene (FPE)
  • Outer Conductor: SPC Strip Braid
  • Outer Braid: Tinned Copper Braid over Aluminum Tape

TCOM-195 Ratings and Approvals:

  • Temperature:
    • Installation: -40°C to 85°C
    • Storage: -70°C to 85°C
    • Operating: -40°C to 85°C
  • Passive Intermod: Lower than -155 dBc- Exceeds performance levels for most wireless applications
  • RF Shielding: 60 dB greater than typical single shielded coax cable (40 dB) - multi-ply bonded foil outer conductor rated conservatively at 100 dB
  • UL/NEC and CSA rating of CMR and FT4

TCOM-195 Applications:

  • -155 dBc Intermodulation Distortion
  • Low Loss UHF/Microwave Interconnect
  • Wireless Base Station Interconnect
  • Flexible for Easy Routing

Construction of TCOM-195 Coax Connectors:

  • Description: Straight plug (see part specs for full details)
  • Inner Contact Attach: Solder (see part specs for full details)
  • Outer Contact Attach: Crimp
  • Coupling Nut: Knurl or Hex
  • Finish Body/Pin: S/G, SS/G
  • See chart below or individual TCOM 195 Connector part specs for more info.