M23053/8 2:1 Kynar Heat Shrink Tubing is a flame retardant, semi-rigid, irradiated Polyvinylidene Fluoride built from a tough thin wall tubing with outstanding cut-through, abrasion, and heat resistance. M23053/8 2:1 Kynar Heat Shrink Tubing may be used for jacketing on components and fuse coverings, or for strain relief applications. Kynar Tubing may be bent, flexed or twisted without losing mechanical or electrical strength. The tubing is even offered in a transparent version, allowing for the see-through inspection and easy identification. The tubing shrinks at 350ºF.

11 items

  • M23053/8-001
    $0.00 / 100 FT
    • CSA Type: OFT
    • Dielectric Strength: 800 V/mil
    • Expanded I.D. (in): 0.046
    View Details
  • M23053/8-002
    $0.00 / 100 FT
    • CSA Type: OFT
    • Dielectric Strength: 800 V/mil
    • Expanded I.D. (in): 0.063
    View Details
  • M23053/8-003
    $0.00 / 100 FT
    • CSA Type: OFT
    • Dielectric Strength: 800 V/mil
    • Expanded I.D. (in): 0.093
    View Details
  • M23053/8-004
    $0.00 / 100 FT
    • CSA Type: OFT
    • Dielectric Strength: 800 V/mil
    • Expanded I.D. (in): 0.125
    View Details
  • M23053/8-005
    $0.00 / 100 FT
    • CSA Type: OFT
    • Dielectric Strength: 800 V/mil
    • Expanded I.D. (in): 0.187
    View Details
  • M23053/8-006
    $0.00 / 100 FT
    • CSA Type: OFT
    • Dielectric Strength: 800 V/mil
    • Expanded I.D. (in): 0.250
    View Details
  • M23053/8-007
    $0.00 / 100 FT
    • CSA Type: OFT
    • Dielectric Strength: 800 V/mil
    • Expanded I.D. (in): 0.375
    View Details
  • M23053/8-008
    $0.00 / 100 FT
    • CSA Type: OFT
    • Dielectric Strength: 800 V/mil
    • Expanded I.D. (in): 0.500
    View Details

Allied Wire and Cable’s vast inventory of M23053/8 Kynar Heat Shrink Tubing provides a tight and secure encapsulation for a variety of parts and applications. For protection from heat, chemicals and moisture, corrosion, and even physical trauma. M23053/8 2:1 Kynar Heat Shrink Tubing guards your most vital components, extending the life through solid-to-semi-solid heat shrink encapsulation. M23053/8 Kynar Heat Shrink Tubing also improves the reliability and performance of the covered parts and can be used in almost any environment.

Allied Wire and Cable’s popular and high performing heat shrinks are available in a variety of shrink ratios and sizes and can be customized to suit other specialty applications. Placing an unshrunk tube around a wire, it is slipped into place after the connection is made then shrunk tightly around the joint with a hot air gun or other heat applying tools. Some heat shrink tubes have been pre-lined with adhesive to create a tighter, longer-lasting and weatherproof seal.