29 items

XLPE/PVC Unshielded Low-Voltage Industrial Power Cable Specifications

XLPE/PVC Low-Voltage Power Cable Construction:

  • Conductor: 14 AWG thru 750 kcmil bare, annealed copper per ASTM B3
    • Class B stranding per ASTM B8
  • Insulation: Flame Retardant Cross-Linked Polyethylene (XLPE)
    • Color-coded per ICEA Method 4; Individual conductors colored black with conductor number surface printed in contrasting ink
  • Ground: Uninsulated bare annealed copper per ASTM B3
    • Class B stranding per ASTM B8
  • Jacket: Flame retardant, moisture and sunlight resistant Polyvinyl Chloride (PVC)
  • Low-Voltage Power Cable Options:
    • Tinned copper conductor
    • Class C stranding
    • E-1 or E-2 Color Code
    • Insulated ground conductors
    • Overall shielded multi conductors
    • Flame Retardant Ethylene Propylene Rubber (EPR) insulation
    • Low-lead Hypalon Chlorosulfonated Polyethylene (CSPE) / Elastomer blend
    • ICEA 1000V rated cable
    • Other constructions available upon request

XLPE/PVC Low-Voltage Power Cable Ratings and Approvals:

  • Voltage Rating: 600V
  • Max. Temperature: 90°C wet or dry
  • Industry Approvals:
    • UL 44 Type XHHW-2
    • UL 1277 Type TC-ER
    • UL 1581
    • ICEA S-95-658/NEMA WC70
  • Flame Tests Approvals:
    • UL 1581 VW-1
    • UL 1277
    • IEEE 383
    • IEEE 1202
    • CSA FT4
  • Other Compliances:
    • Meets EPA 10 CFR, Part 261 for leachable lead content per TCLP method
    • OSHA acceptable

XLPE/PVC Low-Voltage Power Cable Features:

  • Ripcord applied to all cables with jacket thickness of 60 mils or less
  • Excellent electrical properties
  • Abrasion and chemical resistant
  • Sunlight and weather resistant
  • Meets cold bend test at -25°C
  • Meets the crush and impact requirements of Type MC

XLPE/PVC Low-Voltage Power Cable Applications:

  • In free air, raceways, and direct burial applications
  • In wet or dry locations
  • Permitted for use in Class I, Div 2 industrial hazardous locations per NEC
  • Permitted for Exposed Run 'ER' use in accordance with NEC