LMR 400-75 Cable
The LMR 400-75 cable is built for outdoor exposure and flexibility. It features a bare copper inner conductor and an aluminum tape outer conductor, which enables the tightest bend radius of any cable of similar size and performance. It also has a foam PE dielectric, a tinned copper braid, and a black PE jacket. This cable is also UV resistant. The LMR 400-75 uses standard LMR 400 connectors including type-N and type-F male plug with a 75-ohm interface. View LMR 400-75 Connectors here.
LMR-400-75 connectors from Times Microwave are for 75 ohm LMR-400-75 Cable. Interface types include BNC Male, F Male and N Male. Most LMR-400-75 coax connectors feature crimp outer and non-solder center contact attach. Choose from solder-on, solder or spring finger center pins.
2 items
-
.png)
$0.00 / 1000 FT- Application: Indoor/Outdoor
- Approx LBS/MFT: 68.00
- Cond. Material: Bare Copper
-
.png)
$0.00 / 1000 FT- Application: Outdoor
- Approx LBS/MFT: 68.00
- Cond. Material: Bare Copper
LMR 400-75 Ohm Coax Cable Specifications
LMR 400-75 Construction:
- Inner Conductor: Solid Bare Copper
- Dielectric: Foam Polyethylene (FPE)
- Outer Conductor: Aluminum Tape
- Outer Braid: Tinned Copper
- Jacket: Black Polyethylene (PE)
LMR 400-75 Ratings:
- Temperature:
- Installation: -40°C to 85°C
- Storage: -70°C to 85°C
- Operating: -40°C to 85°C
- Voltage Rating: 2000 volts
- RF Shielding: 50 dB greater than typical single shielded coax (40 dB) - multi-ply bonded foil outer conductor rated conservatively at 90 dB
LMR 400-75 Applications:
- LMR 400-75 coax cable is suitable for use in video applications, such as CCTV, CATV, baseband, or broadband.
- Satellite applications
- In-building feeder runs
- LMR 400-75 may be used in any 75-ohm wireless application requiring easily routed, low loss RF cable.
See the chart below and individual LMR 400-75 coaxial cable specifications for full details.
LMR-400-75 Loss Attenuation Specs by Frequency
| Frequency (MHz) | Attenuation (db per 100 feet) |
|---|---|
| 30 | 0.6 |
| 50 | 0.8 |
| 150 | 1.5 |
| 220 | 1.8 |
| 450 | 2.6 |
| 900 | 3.7 |
| 1500 | 4.9 |
| 1800 | 5.4 |
| 2000 | 5.7 |
| 2500 | 6.4 |
Power Handling by Frequency
| Frequency (MHz) | Power (watts) |
|---|---|
| 30 | 2.99 |
| 50 | 2.31 |
| 150 | 1.32 |
| 220 | 1.08 |
| 450 | 0.74 |
| 900 | 0.52 |
| 1500 | 0.39 |
| 1800 | 0.35 |
| 2000 | 0.33 |
| 2500 | 0.30 |
Construction of LMR-400-75 Coax Connectors:
- Description: Straight plug connector type
- Inner Contact Attach: Solder-on, Spring Finger or Solder (see part specs for full details)
- Outer Contact Attach: Crimp
- See chart below for individual Times Microwave LMR 400-75 connector specs TC 400-NM-75/50 is for installation on 75 ohm LMR cable and mates with 50 ohm type-N connectors.