The LMR 100/100a is one of the many low loss coaxial cables we offer at Allied Wire and Cable. This cable features a bare copper steel-clad inner conductor and solid PE dielectric. This allows the tightest bend radius of any cable of similar size and performance. This 50-ohm, UV-resistant cable has the lowest loss of any flexible cable. It is ideal for outdoor exposure and has a life expectancy of over 20 years. It is available in two constructions. One features a flame-retardant PE jacket and the other has a PVC jacket. Both have a double tinned copper braid/aluminum tape shield.

2 items

  • TC-100-SM
    $0.00 /
    • Approx LBS/MFT: 15.00, 64.30
    • Connector Type: Straight Plug
    • Contact Attach (Inner): Solder
    Add to List
  • TC-100-TM
    $0.00 /
    • Approx LBS/MFT: 45.00
    • Connector Type: Straight Plug
    • Contact Attach (Inner): Solder
    Add to List

This low-loss cable is ideal for short antenna feeder runs and jumper assemblies in wireless communications systems. It is also suitable for any application requiring an easily routed, low-loss RF cable. This includes WLL, GPS, LMR, WLAN, WISP, WiMax, SCADA, and Mobile Antenna systems. This LMR cable is a suitable drop-in replacement for the RG316 cable and the RG174 cable. CMR-rated parts of indoor/outdoor riser use are also available.

We also carry a wide variety of LMR 100 connectors, including SMA Male and TNC Male interface types. Times Microwave offers these connectors with a choice of solder or non-solder center pins. Most LMR 100 connectors feature a crimp outer attachment in standard hex crimp sizes.

LMR 100A Coax Cable Specifications

LMR 100A/LMR 100 Construction:

  • Inner Conductor: Solid Bare Copper Clad Steel
  • Dielectric: Solid Polyethylene (PE)
  • Jacket: Flame-Retardant Polyethylene (PE) or Polyvinylchloride (PVC)
    • PVC jacket available in black or white
  • Outer Conductor: Aluminum Tape
  • Outer Braid: Tinned Copper

LMR 100A/LMR 100 Ratings:

  • Temperature:
    • Installation: -40°C to 85°C
    • Storage: -70°C to 85°C
    • Operating: -40°C to 85°C
  • Voltage Rating: 500V
  • RF Shielding: 50 dB greater than typical single shielded coax (40 dB) - multi-ply bonded foil outer conductor is rated conservatively at 90 dB
  • CMR Rated parts available: suitable for indoor/outdoor and indoor/outdoor riser applications.

LMR 100 Standard Connectors:

Construction of LMR 100 Coax Connectors:

  • Description: Straight Plug
  • Inner Contact Attach: Solder
  • Outer Contact Attach: Crimp