The LMR 200 Cable is one of the many low-loss coaxial cables we carry at Allied Wire and Cable. This cable features a bare copper tube for its inner conductor and aluminum tape for its outer conductor, which enables the tightest bend radius of any cable of similar size and performance. It also features a foam PE dielectric and a tinned copper braid. The LMR 200 also has a jacket, but materials vary per product. LMR 200 coax cable is suitable for outdoor exposure, is UV resistant, and offers a life expectancy of over 20 years.

3 items

  • TC-200-BM-X
    $0.00 /
    • Approx LBS/MFT: 45.00
    • Connector Type: Straight Plug
    • Contact Attach (Inner): Solder
    Order
    Add to List
  • TC-200-NMH-X
    $0.00 /
    • Approx LBS/MFT: 86.00
    • Connector Type: Straight Plug
    • Contact Attach (Inner): Solder
    Order
    Add to List
  • TC-200-TF-X
    $0.00 /
    • Approx LBS/MFT: 33.00
    • Connector Type: Straight Jack
    • Contact Attach (Inner): Solder
    Order
    Add to List

A wide selection of LMR 200 connectors is offered for LMR-200 cable, such as straight plug, reverse polarity and straight jack connectors. LMR 200 coax connectors are available in all common interface types: BNC Male, Mini-UHF, N Male, SMA Male, TNC Male and TNC Female. These connectors feature a choice of solder or non-solder center pins. Most LMR-200 connectors utilize a crimp outer attachment in standard hex crimp sizes.

LMR 200 Coax Cable Specifications

LMR 200 Construction:

  • Inner Conductor: Solid Bare Copper
  • Dielectric: Foam Polyethylene (FPE)
  • Outer Conductor: Aluminum Tape
  • Outer Braid: Tinned Copper
  • Jacket: Specified per part, see individual product specs.

LMR 200 Ratings:

  • Temperature:
    • Installation: -40°C to 85°C
    • Storage: -70°C to 85°C
    • Operating: -40°C to 85°C
  • Voltage Rating: 1000 volts
  • UL/NEC Type CMR (LMR-200-FR and LMR-200-FR-PVC only)
  • CSA FT4 (LMR-200-FR and LMR-200-FR-PVC only)
  • RF Shielding: 50 dB greater than typical single shielded coax (40 dB) - multi-ply bonded foil outer conductor rated conservatively at 90 dB

LMR 200 Applications:

  • Short antenna feeder runs in outdoor, outdoor/watertight, indoor/riser (CMR rated cables), indoor/outdoor, and mobile environments.
  • Suitable for use as an easily routed, low loss RF cable, such as WLL, GPS, LMR, WLAN, WISP, WiMax, SCADA, and Mobile Antennas.
  • LMR-200-FR is MSHA-P rated for use in mining applications.

LMR 200 Standard Connectors:

Construction of LMR 200 Coax Connectors:

  • Description: Straight Plug, Reverse Polarity or Straight Jack (see part specs for full details)
  • Inner Contact Attach: Solder or Spring Fit (see part specs for full details)
  • Outer Contact Attach: Crimp or Clamp (see part specs for full details)
  • See chart below and individual LMR 200 Coax Connectors part specs for more info.