LMR-900

The LMR 900 cable features a bare copper tube inner conductor and an aluminum tape outer conductor, which enables the tightest bend radius of any cable of similar size and performance. It also features a foam PE dielectric and a tinned copper braid. This cable features the lowest loss of any flexible cable and has a maximum temperature of 85°C. The LMR 900 cable is designed for outdoor exposure, is UV resistant, and has a life expectancy of over 20 years.

7 items

  • EZ-900-716-MC-RA
    EZ-900-716-MC-RA
    EZ-900-716-MC-RA
    $0.00 /
    • Approx LBS/MFT: 1150.00
    • Connector Type: Right Angle
    • Contact Attach (Inner): Press Fit
    Order
    Add to List
  • EZ-900-716FC-2
    EZ-900-716FC-2
    EZ-900-716FC-2
    $0.00 /
    • Approx LBS/MFT: 379.00
    • Connector Type: Straight Jack
    • Contact Attach (Inner): Press Fit
    Order
    Add to List
  • EZ-900-716MC-2
    EZ-900-716MC-2
    EZ-900-716MC-2
    $0.00 /
    • Approx LBS/MFT: 485.00
    • Connector Type: Straight Plug
    • Contact Attach (Inner): Press Fit
    Order
    Add to List
  • EZ-900-78EIA-2
    EZ-900-78EIA-2
    EZ-900-78EIA-2
    $0.00 /
    • Approx LBS/MFT: 1013.00
    • Connector Type: Straight Plug
    • Contact Attach (Inner): Press Fit
    Order
    Add to List
  • EZ-900-78EIA-RA
    EZ-900-78EIA-RA
    EZ-900-78EIA-RA
    $0.00 /
    • Approx LBS/MFT: 1500.00
    • Connector Type: Right Angle
    • Contact Attach (Inner): Press Fit
    Order
    Add to List
  • EZ-900-NFC-2
    EZ-900-NFC-2
    EZ-900-NFC-2
    $0.00 /
    • Approx LBS/MFT: 443.00
    • Connector Type: Straight Jack
    • Contact Attach (Inner): Press Fit
    Order
    Add to List
  • EZ-900-NMC-2
    EZ-900-NMC-2
    EZ-900-NMC-2
    $0.00 /
    • Approx LBS/MFT: 463.00
    • Connector Type: Straight Plug
    • Contact Attach (Inner): Press Fit
    Order
    Add to List

LMR 900 connectors are offered for LMR-900 cable in type N, 7/16 DIN and 7/8 EIA interface types. LMR 900 coax connectors are available in straight jack, straight plug and right angle options. When transitioning to a smaller interface type than type N, it is best to use a short jumper cable.

LMR 900 Coax Cable Specifications

LMR 900 Cable Construction:

  • Inner Conductor: Bare Copper Tube (0.222" ID)
  • Dielectric: Foam PE (Polyethylene)
  • Outer Conductor: Aluminum Tape
  • Outer Braid: Tinned Copper

LMR 900 Ratings:

  • Temperature:
    • Installation: -40°C to 85°C
    • Storage: -70°C to 85°C
    • Operating: -40°C to 85°C
  • RF Shielding: 50 dB greater than typical single shielded coax (40 dB) - multi-ply bonded foil outer conductor rated conservatively at 90 dB

LMR 900 Applications:

  • Jumper assemblies for 1-5/8" and 2-1/4" feeders
  • Medium antenna feeder runs (no jumpers required)
  • LMR 900 Coax Cable may be used in any application (ex. WLL, GPS, LMR, WLAN, WISP, WiMax, SCADA, Mobile Antennas) requiring easily-routed, low-loss RF cable

LMR 900 Standard Connectors:

Construction of LMR 900 Coax Connectors:

  • Description: Straight Jack, Straight Plug or Right Angle (see part specs for full details)
  • Inner Contact Attach: Press Fit
  • Outer Contact Attach: Clamp
  • See chart below and individual LMR 900 Connector part specs for more info.