TCOM-500
The TCOM-500 Cable is a flexible, low-loss coaxial cable that features a solid bare copper inner conductor and an SPC strip braid outer conductor. This flexible outer conductor enables the tightest bend radius of any cable of similar size and performance. This cable also has a foam PE dielectric and tinned copper braid over an aluminum tape. This cable is a low-smoke zero-halogen cable. It is also flame retardant, UV resistant, and has a maximum temperature of 85°C. The TCOM-500 cable is suitable for indoor and outdoor use.
4 items
-
TC-500-NMH-RA-D$0.00 /- Approx LBS/MFT: 279.00
- Connector Type: Right Angle
- Contact Attach (Inner): Solder
-
TC-500-NMH-X$0.00 /
- Approx LBS/MFT: 99.00
- Connector Type: Straight Plug
- Contact Attach (Inner): Solder
-
TC-500-TM$0.00 /
- Connector Type: Straight Plug
- Contact Attach (Inner): Solder
- Contact Attach (Outer): Crimp
-
TC-500-UMC$0.00 /
- Approx LBS/MFT: 215.00
- Connector Type: Straight Plug
- Contact Attach (Inner): Solder
TCOM-500 Coax Cable Specifications
TCOM-500 Construction:
- Inner Conductor: Solid Bare Copper Clad Aluminum
- Dielectric: Foam Polyethylene (FPE)
- Outer Conductor: SPC Strip Braid
- Outer Braid: Tinned Copper Braid over Aluminum Tape
TCOM-500 Ratings and Approvals:
- Temperature:
- Installation Temp Range: -40°C to 85°C
- Storage Temp Range: -70°C to 85°C
- Operating Temp Range: -40°C to 85°C
- UL/NEC and CSA rating of CMR and FT4
- Passive Intermod: Lower than -155 dBc- Exceeds performance levels for most wireless applications
- RF Shielding: 60 dB greater than typical single shielded coax (40 dB) - multi-ply bonded foil outer conductor rated conservatively at 100 dB
TCOM-500 Applications:
- -155 dBc Intermodulation Distortion
- Low Loss UHF/Microwave Interconnect
- Wireless Base Station Interconnect
- Flexible for Easy Routing