$0.00 / 500 FT
  • Approx LBS/MFT: 0.00
  • CSA Type: 198
  • Dielectric Strength: 800 V/mil
  • Expanded I.D. (in): 3.000
  • Material: Irradiated Polyolefin (PO)
  • Max. Long. Shrinkage: -5%
  • Max. Temp: 135C
  • Max. Tensile Strength: 1500 psi
  • Min. Temp: -55C
  • Nom. Rec. Wall Thick. (in): 0.050
  • Recovered I.D. (in): 1.500
  • Shrink Ratio: 2:1
  • Shrink Temp: 90C
  • Size (in): 3
  • Specific Gravity: 1.35
  • UL Style: 224
  • Ultimate Elongation: 200%
  • Volume Resistivity: 1014 Ohm-cm

HST221-3 — Polyolefin Heat Shrink Tubing

HST221-3 is part of Allied Wire & Cable’s line of irradiated polyolefin heat shrink tubing. Similar to the other products in this line, HST221-3 tubing is able to reliably insulate and protect electrical componenets from environmental forces. This includes solvents, water, and other common fluids. HST221-3 tubing is also heat resistant for up to 135°C and is also flame retardant. Therefore, HST221-3 tubing can be used in some of the most extreme circumstances while still efficiently protecting wires, cables, capacitors, and resistors. Its polyolefin construction also gives HST221-3 tubing increased flexibility, which allows it to continue to protect cables wrapped around tight corners without the risk of cracking or breaking over time.