60 items

FR-EPR/XL-CPE Unshielded Multi-Conductor Control Cable (Type TC) Specifications

FR-EPR/XL-CPE Control Cable (Type TC) Construction:

  • Conductor: 18 AWG and 16 AWG tinned, annealed copper per ASTM B33, Class B stranding per ASTM B8
  • Insulation: Flame retardant Ethylene Propylene Rubber (FR-EPR) Type II
    • Color-coded per ICEA Method 1; Table E-2 (Does not include white or green)
  • Jacket: Cross-Linked Chlorinated Polyethylene (XL-CPE)
  • FR-EPR/XL-CPE Cable (Type TC) Options:
    • 2kV version
    • Bare copper conductor
    • Class C stranding
    • Insulated or uninsulated ground conductors
    • Overall shielded multi-conductor
    • Duralox® aluminum interlocked armor
    • E-1 Color Code
    • Flame-retardant Polyvinyl Chloride (PVC) jacket
    • Thermoplastic Low-Smoke, Zero-Halogen (LSZH) jacket
    • Flame -retardant Thermoplastic Chlorinated Polyethylene (CPE)
    • Other constructions available upon request

FR-EPR/XL-CPE Control Cable (Type TC) Ratings and Approvals:

  • Voltage Rating: 600V
  • Max. Temperature: 90°C, wet or dry
  • UL 1277 Type TC
  • UL 1581
  • ICEA S-73-532
  • ICEA S-95-658/NEMA WC70
  • UL 1581 VW-1
  • UL 1277 Flame Test
  • IEEE 383
  • IEEE 1202
  • CSA FT4
  • ICEA T-29-520

FR-EPR/XL-CPE Control Cable (Type TC) Features:

  • Ripcord applied to all cables with jacket thickness of 60 mils or less
  • Excellent physical, thermal, and electrical properties
  • Excellent moisture resistance
  • Outstanding resistance to crush, compression cuts, and heat deformation
  • Excellent flame resistance
  • Excellent low-temperature cold bend characteristics
  • Good abrasion resistance
  • Low moisture absorption characteristics
  • "Heavy-Duty" rating per ICEA standards
  • Meets cold bend test at -35°C
  • Meets the crush and impact requirements of Type MC cable (2 AWG and larger)

FR-EPR/XL-CPE Control Cable (Type TC) Applications:

  • In free air, raceways, or direct burial
  • In wet or dry locations
  • At temperature as low as -35°C
  • Permitted for use in Class I Division 2 industrial hazardous locations per NEC