LMR-195
LMR 195 coax cable is one of the many low-loss coaxial cables we carry at Allied Wire and Cable. This cable is constructed of a solid bare copper inner conductor and an aluminum tape outer conductor. This outer conductor enables the tightest bend radius of any cable of similar size and performance. It also features a foam PE dielectric and a tinned copper braid. This cable exhibits the lowest loss of any flexible cable and has a maximum temperature of 85°C. These coax cables offer the lowest loss of any flexible cable with a comparable loss to semi-rigid hard-line cables. LMR 195 coax cable is designed for outdoor exposure, is UV resistant, and has a life expectancy of over 20 years.
1
items
-
-
Approx LBS/MFT:
83.00
-
Connector Type:
Right Angle
-
Contact Attach (Inner):
Solder
LMR 195 Coax Cable Specifications
LMR 195 Coax Cable Construction:
Inner Conductor |
Solid Bare Copper |
Dielectric |
Foam PE |
Outer Conductor |
Aluminum Tape |
Outer Braid |
Tinned Copper |
LMR 195 Coax Cable Ratings:
Temperature |
Installation |
-40°C to 85°C |
Storage |
-70°C to 85°C |
Operating |
-40°C to 85°C |
RF Shielding |
50 dB greater than typical single shielded coax (40 dB) - multi-ply bonded foil outer conductor rated conservatively at 90 dB |
LMR 195 Coax Cable Applications:
Jumper assemblies in wireless communications systems |
Short antenna feeder runs |
Applications requiring easily routed, low-loss RF cable (ex. WLL, GPS, LMR, WLAN, WISP, WiMax, SCADA, Mobile Antennas) |
Drop-in replacement for RG58 and RG142 |
LMR 195 Standard Connectors:
A wide range of LMR 195 connectors are offered for LMR-195 cable, including all common types of interfaces and reverse polarity. LMR 195 connectors are available with a choice of solder or non-solder center pins. Most of these connectors feature a crimp outer attachment in standard hex crimp sizes.