- Application: Electrical Installation, Rail Transportation Sector, Panel Building, Electronics Industry, OEM Industry
- Color: Gray
- Height (in): 3.15
- Length (ft): 6.56
- Material: Acrylonitrile Butadiene Styrene Alloyed with Polycarbonate
- Operating Temp.: -13 to 194F (-25 to 90C)
- Side Wall Type: Slotted
- Width (in): 3.94
- Width W2 (in): 0.24
- Width W3 (in): 0.26
183-21080 — HellermannTyton Slotted Wiring Duct
HellermannTyton Halogen Free Slotted Wiring Duct & Cover, without Adhesive, 100mm x 80mm, Piece/ABS, Gray, 12 m/Box engineered for demanding identification needs in industrial environments. HelaDuct HTWD-HF wiring duct is used to route and protect wires in control panels and switching systems where there are high demands on personal or material safety in case of fire, such as in public transport, tunnels, data processing centers or public buildings. Excellent fire-safety characteristics. Narrow slots suitable for small-diameter wires. Smooth, burr-free edges protect installers from injury and wires from damage. Fingers can be removed with no sharp edges at pre-notched snap-off points. Further pre-notched snap-off point at base of sidewall allow cutting out and removing sections of sidewall with no sharp edges. Duct covers hold securely even in a vertical position and under vibration. Cover is flush with side of duct, allowing for tight, contiguous placement of duct. Base perforation according to DIN EN 50085.
- Material: Acrylonitrile Butadiene Styrene alloyed with Polycarbonate (PC/ABS)
- Operating Temperature: -13F to +194F (-25C to +90C)
- Length: 6.56 ft
- Length (metric): 2.0 m
- Width: 3.94 "
- Width (metric): 100.0 mm
- Color: Gray (GY)
- Storage: Store in a sealed package. Avoid direct heat sources and sunlight. Ideal storage conditions: 73F (22.8C), 50% RH
- Use Conditions: For Indoor Use Only