120-06002

The AT2000 CPK automatic cable tying system adapts to any industrial workflow. Part number 120-06002 provides this functionality. It excels in high-volume automatic bundling applications “ especially where precision and repeatability are critical. The tool is electronically operated. Cycle rate is adjustable between 0.8 and 1.4 seconds, depending on what™s best for the application. With a pull of the trigger, the tool applies an 18 lb. cable tie around a wire or tube bundle and is instantly ready to apply the next. Cable ties are available on 50-piece bandoliers and 5,000-piece reels. The AT2000 CPK uses two discreet drive motors. One motor delivers the tie, the other controls tension. Tension consistency is monitored in the software “ especially useful when verification is required. Configurable blade enables the AT2000 CPK to cut cable ties flush or with a tail, depending on application requirements. An onboard TFT display shows production data, fault diagnostics and device control in 19 languages. Accessories are available to enhance the tool's efficiency in various workflows from hand operated to fully automated. Specially manufactured to comply with Military Specification MS3367-4-9, Class 2 and SAE AS-33671.

Independent tensioning drive provides unequalled tensioning control and repeatability. New software and user interface make managing the bundling tension and speed. tracking performance. troubleshooting issues and logging data easier than ever before. Counterbalanced hanger causes the AT2000 CPK to feel virtually weightless. enhancing ergonomics without restricting a user™s motion. Removable handle enables integration with fully automated applications to further increase productivity and decrease labor costs. Configurable blade enables AT2000 CPK to cut cable ties flush or with a tail. depending on application requirements. Complies with MS3367-4-9. Class 2 and SAE-AS33671.

The product is made from Polyamide 6.6 (PA66) and is engineered for an operating temperature range of -40F to +185F (-40C to +85C) and is supplied in Natural (NA) and should be stored in Store in a sealed package. Avoid direct heat sources and sunlight. Ideal storage conditions: 73F (22.8C), 50% RH with intended use for For Indoor Use Only.

Diameter specifications include Bundle Diameter Max. (Imperial) 0.79"; Bundle Diameter Max. (Metric) 20.0mm; Bundle Diameter Min. (Imperial) 0.06"; Bundle Diameter Min. (Metric) 1.5mm.

It is available in a length of 152.4mm.

Tensile strength is rated at 18 lbs, 8.16 kgf, 80 N.

This product is suitable for applications in Aerospace Industry; Automotive Industry; Chemical Industry; Defence Industry; Electronics Industry; Food Industry; Rail Transportation Sector; Shipbuilding; Solar Energy Sector; Telecommunication; Wind Energy Sector.

Variant on reel Width W (Imperial) 0.10" Width W (Metric) 2.5mm.

Order today for reliable performance and quality.