MB5A0F4

HellermannTyton Adhesive Cable Tie Mounting Bases are used with T18 through T150 Series cable ties to provide stability when securing bundles. Part number MB5A0F4 provides this functionality. The mounts are installed using the adhesive backing and/or by securing two or four screws. The 4-way opening allows the cable ties to be inserted parallel or perpendicular to the wire bundles. Rubber-based adhesive allows for a permanent bond to most surfaces.

For use with HellermannTyton T18 - T150 cable ties to provide stability when securing bundles. 4-way opening allows cable ties to be installed parallel or perpendicular to bundles. The rubber-based adhesive is an economical choice ideal for indoor applications. with a static load weight of 2.1 lb. Two predrilled holes extend mounting options and solutions. Extended adhesive liner is easy to remove quickly.

The product is made from Polyamide 6.6 (PA66) and is engineered for an operating temperature range of -40F to +185F (-40C to +85C), 0F to +150F (-18 C to +66 C) and is supplied in Black (BK) and should be stored in Store in a sealed package. Avoid direct heat sources and sunlight. Ideal storage conditions: 73F (22.8C), 50% RH with intended use for For Indoor and Outdoor Use.

Diameter specifications include Mounting Hole Diameter D (Imperial) 0.19"; Mounting Hole Diameter D (Metric) 4.8mm.

It is available in a length of 1.49", 37.7mm.

Adhesive Synthetic rubber with base of polyethylene foam Cable Tie Width Max. (Imperial) 0.35" Fixation Method Adhesive For Cable Ties T18 - T150 Height H (Imperial) .28" Height H (Metric) 7.1mm Maximum Recommended Load (imperial) 2.1 lbf-ft Maximum Recommended Load (metric) 0.95 kgf Maximum recommended load (N) 9.341 N Mounting Hole Centers (Imperial) 1.0" Mounting Hole Centers (Metric) 25.3mm Mounting Screw Type #8 Screw Thickness of Adhesive TA (Imperial) 0.031" Thickness of Adhesive TA (Metric) 0.8mm Width W (Imperial) 1.49" Width W (Metric) 37.7mm.

Order today for reliable performance and quality.