FIT Wire Management Sleeving Products

FIT® cable management sleeve products from Alpha Wire provide safe and secure wire protection in arduous environments. Products include cable organizer sleeving, cord covers and accessories, as well as a comprehensive range of shrink sleeving. Alpha manufactures these products in the United States and their two facilities in Carson, CA and Leominster, MA have ISO 9001 Certification.

120 items

FIT Sleeving

FIT sleeving consists of tubular cable protector products made from PVC and PTFE, along with watertight corrugated PVC and zipper-style sleeving.

PVC-105 Tubing

FIT PVC-105 tubing is a thick-walled polyvinyl chloride (PVC) tubing that provides flexible protection for wiring harnesses. The inside diameter of PVC-105 tubing goes from 24 American wire gauge up to 2.5 inches. The PVC tubing is UV stabilized. It's rated for a maximum temperature of 105 degrees Celsius and is resistant to abrasion, oil, and fungi.

PVC-105 Tubing Specifications

  • Voltage rating: 300 volts for 24 AWG to 1 AWG and 600 volts for 5/16-inch to 2-inch diameters
  • Material: PVC
  • Temperature rating: -20 C to 105 C
  • Tensile Strength: 2,780 pounds per square inch
  • Maximum elongation: 260%

PVC-105 Certifications

  • UL 224 standard for safety extruded insulating tubing
  • UL VW-1 Vertical Flammability Test
  • Canadian Standards Association CSA 198
  • ASTM D922
  • Military specification MIL-1-631D
  • Restriction of Hazardous Substances (RoHS)-compliant

TFT PTFE Sleeving

Made from polytetrafluoroethylene (PTFE), TFT thin-walled sleeving is a flexible, low-friction tubing for wiring harnesses. It's unaffected by corrosive substances and resists fungi. You can use TFT tubing over a wide temperature range from -75 C to 260 C

TFT Tubing Specifications

  • Temperature rating: -75 C to 260 C
  • Material: PTFE
  • Tensile Strength: 2,000 pounds per square inch
  • Maximum elongation: 200%

TFT Tubing Certifications

  • ASTM D 33295-81a Type 1
  • AMS 36545
  • RoHS compliant

FNT Spiral PVC Tubing

FNT tubing is a flexible spiral wrap cable management tube tubing made from PVC. The tubing is waterproof and usable in tight quarters and raceways. It's available in 25- and 100-foot lengths. Nominal internal diameters are from 0.25 of an inch up to 1 inch. You connect FNT tubing using SLC waterproof connectors. FNT organizer tube resists oil, water, and fungi in cable raceways.

FNT Tubing Specifications

  • Temperature rating: -18 C to 50 C
  • Material: PVC
  • Color: Black

FNT Tubing Certifications

  • UL 1696 for mechanical protection tubing
  • CSA C22.2 No 227.3-05 compliant (except FNT-1/4)
  • UL 94V-0 flame test compliant
  • RoHS compliant

ZIP-41 Sleeving

Zipper Tubing™ is an ingenious PVC cord organizer that uses a Loc-Trac® zipper to close the tube. This allows you to open the tubing to add wires and accommodate multiple wire breakouts using the hook and loop fastener system. You can use ZIP-41 tubing in harsh environments. The product resists abrasion, chemicals, and fungi and meets the requirements of the VW-1 flammability test. Sizes are from 0.5-inch to 3 inches.

ZIP-41 Tubing Specifications

  • Material: PVC
  • Temperature rating: -20 C to 105 C
  • Tensile Strength: 1,800 pounds per square inch
  • Maximum elongation: 200%

ZIP-41 Certifications

  • UL 224 standard for safety extruded insulating tubing
  • UL VW-1 Vertical flammability Test
  • Military specification MIL-1-631D
  • RoHS compliant

Heat Shrink Sleeving

FIT heat polyolefin shrink-sleeving is a versatile solution for creating wire harnesses and for finishing off terminations.

STF221 2:1 Heat Shrink Sleeving

STF221 is general-purpose heat shrink tubing with a low 90 C shrink temperature and a shrink ratio of 2:1. Made from a flame-resistant cross-linked polyolefin, STF221 has a wide usable temperature range from -55 C to 135 C. It is available in a variety of colors, including clear. This tubing has UL224, CSA 198, and AMS-DTL-23053/5 Class 1 and 2 approvals (except for clear tubing) and is RoHS compliant.

SPC 3:1 Shrink Sleeving

SPC heat shrink is a heavy-walled cross-linked polyolefin heat shrink with an adhesive-lined thermoplastic bonding layer that forms a watertight seal. The shrink ratio is 3:1. SPC heat shrink has good abrasion, chemical, and water resistance. Usable temperatures are from -55 C and 110 C, and the shrink temperature is 120 C. This tubing has a 1,000-volt rating and is flame resistant. It has AMS-DTL-23053/15 Class 1 approval and is RoHS compliant.

SPCM 3:1 Heat Shrink Sleeving

SPCM is a medium-walled, thermoplastic adhesive, cross-linked polyolefin heat shrink tubing with an excellent maximum temperature rating of 200 C. The minimum temperature is -55 C, while the shrink temperature is 120 C. It is rated for 1,000 volts and has AMS-DTL-23053/15 Class 2 approval and is RoHS compliant.  

Contact us for further information on standard and custom FIT tubing and cable management solutions.